HATO 50S-1
400V
The HATO 50S-1 gate operator can be used in garages, industrial and service buildings.
It is characterized by a compact structure, reliability and operational safety.
THREE BUTTONS ON THE CONTROL PANEL
Three buttons on the control unit (open - open, close - close, stop) operate the gate independently. The control system is equipped with connections for a photosensor, safety edge, etc.
EMERGENCY STOP
If necessary, pressing the safety button on the control unit immediately cuts off the power to the device.
VARIABLE CODE TECHNOLOGY
The rolling coding technology used prevents unauthorized persons from guessing the code. Up to 25 remote controls can be installed.
AUTOMATIC BRAKING
The automatic braking system stops the device quickly and precisely.
EMERGENCY CHAIN
In case of a power failure, the emergency operation chain allows the gate to be opened / closed manually.
LIMIT SWITCHES
The drive is equipped with double limit switches for greater safety and reliability.
MECHANICAL RELEASE HANDLE
Turning the mechanical release handle 180 ° counterclockwise will immediately detach the door from the drive. The motor can only be disconnected when the door is in the closed position.
CE + declaration of conformity
- HATO confirms that the product meets the requirements of European Union directives.
Warranty
- 24 months.
- HATO 50S-1 drive
- control unit
- HP-005 remote control
HATO 50S-1 drive specification
Supply voltage
400V
Max. torque
50 Nm
Engine revolutions
1400 rpm
Max. range of movement
5 m
Output shaft bore
25,4 mm
The length of the emergency service chain
8 m
Shaft rotation
32 rpm
Working temperature range
-10°C; +40°C
Gear ratio
43/1
Working time / rest time ratio
S3 25%
Control board
XF41
Pilot operating frequency
433,92 MHz with rolling code
Min. Range of the remote control in open area
30 m
Remote control battery type
CR2032
Dimensions (length x height x width)
370 mm x 230 mm x 100 mm
Weight
14 kg
download our catalogue
