HATO 100
MODERN APPEARANCE / HIGH WORK CULTURE / ADVANCED TECHNOLOGY / SAFETY
A modern motor for industrial gates, electronically commutated. Thanks to the use of this technology, it has maximum torque from the slowest revolutions. The automatic machine is equipped with a soft start and stop, which increases the life of the gate.
Quick installation, simple connection and intuitive programming of controls combined with failure-free operation translate into the reliability of the HATO industrial gate automation system.
Features of the HATO 100 drive:
- easy assembly through the use of unique connectors
- end positions and all parameters set from the control panel
- the latest engine control technology
- the drive works with a wide range of security devices installed in gates
- possibility of password protection
- easy to set and precise limit switches
- equipped with a chain drive / winch
- mounted on a standard 1 inch gate shaft (25.4 mm)
- radio receiver memory - 25 transmitters
- gear in oil bath increasing the service life of the drive
- frequency of use / number of cycles per hour
THREE BUTTONS ON THE CONTROL PANEL
Three buttons on the control unit (open - open, close - close, stop) operate the gate independently. The control system is equipped with connections for a photosensor, safety edge, etc.
EMERGENCY STOP
If necessary, pressing the safety button on the control unit immediately cuts off the power to the device.
VARIABLE CODE TECHNOLOGY
The rolling coding technology used prevents unauthorized persons from guessing the code. Up to 25 remote controls can be installed.
AUTOMATIC BRAKING
The automatic braking system stops the device quickly and precisely.
EMERGENCY CHAIN
In case of a power failure, the emergency operation chain allows the gate to be opened / closed manually.
LIMIT SWITCHES
The drive is equipped with double limit switches for greater safety and reliability.
MECHANICAL RELEASE HANDLE
Turning the mechanical release handle 180 ° counterclockwise will immediately detach the door from the drive. The motor can only be disconnected when the door is in the closed position.
CE + declaration of conformity
- HATO confirms that the product meets the requirements of European Union directives.
Warranty
- 24 months.
- HATO 70 drive
- control unit
- HP-005 remote control
HATO 100 drive specification:
Supply voltage
230 V AC
Power
750 W
Maximum torque
100 Nm
Output speed range
10-40 RPM
Max. load (door area)
45 m2
Reducer lubrication system
lubrication with liquid oil
Encoder type
Single Circle Absolute Encoder
Manual / Auto mode
string switch
Manual control
with a Chain
Maximum opening height
19 shaft revolutions
Working temperature
-20℃ ～+50℃
Dimensions (length x height x width)
337 mm x 135 mm x 214 mm
Weight
12,5 kg
HATO 50
HATO 60
HATO 50S-1
HATO 70
HATO 100
download our catalogue
