HATO SWING 400
The HATO SWING series of double-leaf gate drives is designed for home use. They are equipped with safety systems and a soft start stop.
Undoubtedly, the advantage of the HATO motor is the force regulation, which allows it to be installed in gates weighing up to 200 kg and a leaf length of up to 5 m.
In addition, they are equipped with a manual unlocking mechanism with a key and wicket functions, meaning partial opening of one leaf for pedestrian passage.
All machines are equipped with the highest quality control electronics, which are entirely manufactured in Poland and meet all European standards.
Features of HATO SWING 400 drive
- HELB9C control unit of produced in Poland
- the strongest drive in its class on the market
- slowdown - radio receiver memory - 32 transmitters
- possibility of opening one span (wicket function)
- for single and double-leaf gates
- unlocking with a key
- self-locking motor
- motor protected by a thermal switch
- increased safety thanks to the possibility of using safety devices such as photosensors or an edge strip
- equipped with an encoder
- product made in the EU
Auto CLOSE
The system will automatically close the gate after a programmed time (it is recommended to use this operating mode only with connected photosensors).
MANUAL EMERGENCY OPENING
In the event of power loss or failure, the drive has a manual unlocking system using a special key attached to the set.
VARIABLE CODE TECHNOLOGY
The remote control works in the rolling code technology at 433.92 MHz.
WICKET FUNCTION
The gate opens until the light line of the photosensors is not crossed.
THE ESTATE FUNCTION
The door can only be opened with the remote control or the control input. Closing occurs through the auto-closing function after a programmed time.
WORKING IN THE BASIC MODE
Each pressing of the remote control or the manual button causes the next step of the system operation.
CE + declaration of conformity
- HATO confirms that the product meets the requirements of European Union directives.
Warranty
- 24 months.
- two SEING drive arms
- control panel with cover available in two versions: HELB9C / HEL12
- remote
- photosensors
- fastening elements
HATO SWING 400 drive specification
Supply voltage
230V AC +/-10% 50Hz
Engine power
180 W
Maximum current
0,9 A
Max. leaf length
4 m
Max. leaf weight
200 kg
Actuator stroke
40 cm
Operating temperature range
-20 C; +40 C
Maximum strength
1600 N
Opening time
22 s
Thermal protection temperature
150
Operating time factor
35 %
Lubrication
solid lubricant
Pilot operating frequency
433,92 MHz with rolling code
Min. Range of the remote control in open area
30 m
Remote control battery type
23 A (12 V)
Control board
HELB9C / HEL12
Dimensions (length x height x width)
777 mm x 188 mm x 91 mm
DOWNLOAD OUR CATALOGUE